Showing posts with label Lights. Show all posts
Showing posts with label Lights. Show all posts

Tuesday, December 13, 2016

Touching up minor details

We have another clock up, this time at our dining area. Loving the classical feel of the roman numerals
Did some minor touch up to our living room track light. We usually keep this lights on during our movie time so that we could see what we are eating and not fiddle with our spoons in the dark. However, the track lights were too strong and overpowered the screen, turning it too orange-ly. So we cut some papers up to act as a filter, reducing the amount of lights to just sufficient only. It turns out great and we could now watch our movies while having our meals without compromising either.

Christmas is coming, time to get ready for it!

Friday, November 25, 2016

Quality does Matter - Bedhead Lights

Previously we had bought our LED strips from Qoo10 in our attempt to save some money considering that the whole package cost at least one-fifth of what the local lighting shops are selling at. Most of them were working fine, except our bedhead ones which burns out every 30min. We assessed the fault to lie with the adaptor, and suspected that it could have overheated in that enclosed cabinet. Regardless, it was quite disruptive having to off-on the switch again only to have it burn out again in 30min. Thinking it was a faulty adaptor, i ordered another adaptor from Qoo10, and that burned out in like 5min. Zzz.

So i decided to head down to my local lighting store to get their expensive adaptor which look like this, and it definitely feels better than those laptop-charger-like adaptors from the Qoo10 seller. At almost three-times the price, it better be good. Turns out, it did work, and the burn out issues did not happen again.

Now we could enjoy some proper ambiance lights at our bedroom without having it blackout every now and then. Fortunately though, the other adaptors for my LED strips at the kitchen and living room had no issues so far, but if they do burn out, I know the appropriate solution now.

My ID had also made a fitting box for the adaptor as it could not fit inside the bedhead. Not the ideal situation i have to say, but this does make it look better than having the adaptor exposed in this shelves. Hopefully, it does not cause it to overheat further.

Wednesday, August 17, 2016

Few more Minor Touch Ups

Ever since we officially moved into the house, we have brought many electronics into our home. Due to their high values, we insisted in replacing the number lock to our house with a legit padlock. This way, it is more secure than a number lock, which could be broken into in less than a minute, and it also restrict the contractors from entering without the supervision of my interior designer. However, such security resulted in a standstill in our renovation. It has been almost a month of no updates, and it is slowly draining our patience out. The only thing that is making us hold on is that we constantly find new things to get our contractors to touch up or install, so it all works well somehow.

Just a rough list of what there are to do....

Wild hairline cracks appeared at our entrance. It is not obvious but upon a closer inspection, it becomes hard to ignore. A repaint job would have to be done.

Previously had plastered the ceiling, but because it was so similar to the ceiling paint, we missed it out and only found out several days later. Touch up paint would be required.

Several grout lines has some holes on closer inspection. Although this was probably there since the beginning of time, our designer said it could be fixed up and he can take it up so we are looking forward to it

We had requested for this netting thing to be changed to an acrylic board so as to prevent cobwebs and dusts from collecting, and also it look nicer with the toilet ambiance lights. Still waiting for the acrylic boards to be delivered and put up.

Had installed LED lights at our bedhead, and the drivers are placed in the display cabinet at the side. Had requested for a cover to be made to hide the drivers, and is still waiting for it. There were also some problem with our lights, where it kept losing power after a while, and had requested for our electrician to take a look at it.

After trying our designer tap for a while, we really dislike it and intend to change it. The water power is too low, and the water stream is too close to the edge. Kind of an installation issue when they drilled the holes on the quartz top, but a change in the tap should fix the issue.

Where the walls meet the floors will often have gaps like this. It is unavoidable, but that is the reason why trimming are always used around the house. Here shows an area of the wall where the trimming was forgotten and the hole was visible. Now we need it to be covered up.


Another area where there the trimming is missing, but because this area is quite small, we would be covering it with the brown sealant to cover the gap.

And lastly, because we had chose for such a bold solid color, the painters need to apply many layers of coat to achieve the desired result. However, this also mean that the paint is prone to being chipped off whenever we accidentally knock something against it. Here is yet another hole that require to be painted over again due to our carelessness. Being extremely careful is the price to pay for having our walls painted with such bold colors.

Would there be more discoveries after another round of inspection?

Saturday, July 9, 2016

How colors make a world of a difference


Our LED light strips are up and running! Initially, we were skeptical about the whole cove light things, and had decided on not having it until our ID convinced us otherwise. Now with the lights installed, we had a great time playing with them. And it is true, the interchangeable lights does affect the whole mood of the house. Romantic, cool, bright, party, you want it, we make it happened. However we need to be considerate for our neighbors. The hubby have plans to change all the downlights to interchangeable lights and make them flash according to the music bass, but that would be too badass and neighbor-unfriendly. Perhaps when we have a private estate next time.

Movie nights are for sure at our house so we definitely should not blind each other whenever we need to grab or prepare something from the kitchen. So we got LED light strips all over to provide just sufficient light to get our snacks ready because we get back to our couch and unpause the movies.

Our sleeping crib is not spared too. Loved the atmosphere here, almost as if inviting us to quickly lay down on the soon-to-be-delivered bed for a good night sleep. This is it!

Saturday, April 30, 2016

Let there be lights!

We have finally purchased all our lights from Sembawang Lighting House. Initially we wanted to get the cheaper version of lights from taobao/qoo10/tampoi but they did not had the safety mark on the driver. Being the afraid-unable-to-claim-insurance-if-anything-happen couple, we decided to invest a little more into getting lights with the safety mark. Nevertheless, please don't burn our house down. Again like every other part of the renovation, we were taken by surprise by how expensive lights can cost, and how many different variations there are. We have opt for all our lights to be LED so that they can hopefully last longer than the usual fluorescent bulbs. And hopefully use less power too!


All the sperms from the ceiling before the lights were installed. And that is Ah Chong, my electrician who is duh, in charge of all my electrical issues.

Kitchen light and fan is up. I have always been in love with the Vento Fino since the day i chanced upon them online. This is however an Elmark version of the Fino, which is less aesthetic than the Fino, but it is made of plastic, and i figured it would be easier to maintain this than the Fino's wood blades as this is located in the kitchen. Tested the wind and it is damn cool (pun intended). The oscillation was however on the slow side, but i guess everyone will get more wind in some sense.

Let there be lights! Finally we are able to go to our new house at night without having to bring our portable camping latern. We had mounted the projector too, hopefully it is in the right position and distance from the wall. Originally it was planned to be further in front (beside the access panel) but on testing, we realised that the screen was not big enough. It was big at about 100 inch, but not close enough to our desired 150 inch. So we move it back and hopefully it will be just nice without being blocked by our TV console. Shall wait till all the furniture are in and set.